Curtain Wall Shop Drawings
Develop project-defined curtain wall elevations, layouts, sections and interface details.
FAÇADE • CURTAIN WALL • GLAZING • CLADDING
Façade, Curtain Wall & Glazing Shop Drawing Services
Develop detailed façade shop drawing packages from supplied architectural, system, structural and manufacturer information — supporting curtain wall, storefront, glazing, cladding, panel layouts, interface details and multidisciplinary coordination.
Review
Design Information
Detail
Façade Systems
Coordinate
Project Interfaces
Issue
Shop Drawing Package
Façade Documentation
Translate Design Intent into Coordinated Façade Documentation
Façade shop drawings sit between architectural design information and downstream system fabrication or installation workflows.
They can define panel layouts, mullion and transom locations, glazing zones, cladding arrangements, sections, perimeter interfaces and other project-specific details based on supplied information.
The objective is to make façade geometry, interfaces and drawing revisions easier to review before downstream execution.
Elevations → Layouts → Sections → Interfaces → Revisions
Structured façade documentation
for coordinated project delivery.
Façade Shop Drawing Capabilities
Detailed Documentation Across Façade Systems
Scope can be aligned to supplied system information, architectural requirements, approved design data and project-specific shop drawing requirements.
Storefront Drawings
Prepare storefront layout and detail documentation from supplied system information.
Glazing Shop Drawings
Document project-defined glazing locations, panel organization and interface conditions.
Cladding Drawings
Develop panel, elevation and interface information for defined cladding systems.
Panel Layouts
Prepare coordinated panel grids, joint layouts and project-defined identifiers.
Façade Detail Development
Produce sections, head, sill, jamb and related interface details from supplied design information.
Building Interface Coordination
Coordinate façade information with architecture, structure and project-defined adjacent systems.
Redline & Revision Updates
Incorporate approved comments, redlines and revised project information.
Façade BIM Coordination
Support façade model information and multidisciplinary BIM coordination where included in scope.
Façade Systems
Shop Drawing Support for Different Envelope Systems
Curtain Wall Systems
Layout,
elevations,
sections
and system-interface documentation.
Storefront Systems
Storefront glazing,
framing
and opening-related
documentation support.
Window Systems
Project-defined
window layouts,
opening coordination
and interface details.
Glazed Entrances
Document supplied
entrance-system information
and adjacent façade interfaces.
Metal Cladding
Panel layouts,
joint organization
and defined interface conditions.
Architectural Panels
Project-defined
panel arrangements,
dimensions
and façade documentation.
Typical Façade Details
Document the Interfaces That Drive the Envelope
DETAIL 01
Head Details
Project-defined
upper façade
and opening interfaces.
DETAIL 02
Sill Details
Lower glazing,
framing
and adjacent-building interfaces.
DETAIL 03
Jamb Details
Side conditions
at openings,
walls
and adjacent façade zones.
DETAIL 04
Mullion Details
Vertical framing
information based on
supplied system requirements.
DETAIL 05
Transom Details
Horizontal framing
interfaces within
defined façade systems.
DETAIL 06
Corner Conditions
Internal,
external
and project-defined
corner arrangements.
DETAIL 07
Slab Edge Interfaces
Coordinate façade
system information
relative to structural slab edges.
DETAIL 08
Parapet Conditions
Document project-defined
façade transitions
at roof
and parapet zones.
DETAIL 09
Base Conditions
Lower façade
interfaces with
slabs,
floors
or adjacent construction.
DETAIL 10
Expansion Interfaces
Document supplied
project movement
and joint information
where applicable.
DETAIL 11
Door Interfaces
Coordinate façade
framing with
project-defined entrance conditions.
DETAIL 12
Adjacent Material Transitions
Document façade
transitions between
defined envelope materials.
Façade Coordination Control
A Clean Elevation Does Not Automatically Mean the Façade Is Coordinated
Elevations may look complete while slab edges, openings, embeds, adjacent finishes or structural interfaces remain unresolved.
Shop drawing development should therefore keep system information, architectural dimensions and project interfaces aligned through controlled revisions.
Elevation Alignment
Check panel,
framing
and opening organization
against supplied design information.
Structural Interfaces
Keep slab,
framing
and support interfaces visible
for responsible project review.
Architectural Interfaces
Coordinate façade geometry
with walls,
ceilings,
floors
and adjacent finishes.
Revision Control
Track approved comments
and current
project information
before reissue.
Façade Shop Drawing Workflow
From Design Information to Review-Ready Drawings
01
Review
Review architectural, structural, system and project information.
02
Establish
Confirm elevations, grids, openings, dimensions and scope boundaries.
03
Detail
Develop layouts, elevations, sections and interface details.
04
Coordinate
Review façade interfaces with architecture, structure and adjacent systems.
05
Revise
Incorporate approved review comments and updated project information.
06
Issue
Prepare the agreed shop drawing package for project review.
Drawing Deliverables
Typical Façade Shop Drawing Outputs
Overall Elevations
Document façade organization, grids, panel divisions and project-defined system zones.
Enlarged Elevations
Develop detailed views for selected façade areas or conditions.
Plan Details
Prepare plan-oriented interface details at corners, walls, openings and transitions.
Vertical Sections
Document floor-to-floor and vertical façade relationships.
Horizontal Sections
Show mullions, jambs, adjacent walls and project-defined interfaces.
Panel Layout Drawings
Organize defined panel dimensions, joints, identifiers and façade zones.
Interface Details
Document façade relationships with structural and architectural construction.
Revision Packages
Update drawing packages based on approved redlines, comments and project changes.
Façade Coordination Interfaces
Coordinate the Envelope with the Building Around It
INTERFACE 01
Slab Edges
Review façade
positioning relative
to supplied
slab-edge information.
INTERFACE 02
Structural Framing
Coordinate façade
zones with
structural framing
and support conditions.
INTERFACE 03
Wall Construction
Review transitions
between façade
systems and adjacent walls.
INTERFACE 04
Floor Finishes
Coordinate project-defined
floor conditions
with lower façade interfaces.
INTERFACE 05
Ceilings
Review internal
ceiling transitions
near glazing
and façade framing.
INTERFACE 06
Entrances
Coordinate doors,
storefront
and entrance
façade conditions.
INTERFACE 07
Roof / Parapet
Coordinate façade
termination
with project-defined
upper-building conditions.
INTERFACE 08
Adjacent Materials
Review transitions
between glazing,
cladding
and adjacent finishes.
Façade BIM Coordination
Bring Façade Information into the Federated Model
Façade + Architecture
Coordinate envelope geometry,
openings,
walls,
floors
and architectural intent.
Façade + Structure
Review slab edges,
structural framing
and project-defined
support interfaces.
Façade + Interiors
Coordinate interior
finishes,
ceilings
and perimeter conditions.
Façade + MEPF
Review project-defined
perimeter service
and façade interface conditions.
Façade + Entrances
Coordinate glazed entrances,
door openings
and adjacent framing conditions.
Façade + Existing Conditions
Support renovation
or replacement projects
using supplied
existing-condition information.
Inputs & Deliverables
Approved Project Information In. Coordinated Façade Drawings Out.
Typical Inputs
- Architectural drawings
- Architectural BIM models
- Structural drawings / models
- Façade system information
- Manufacturer data
- Approved product information
- Design elevations
- Project specifications
- Review comments / redlines
- Project BIM requirements
Typical Deliverables
- Façade shop drawing package
- Curtain wall elevations
- Storefront drawings
- Glazing layouts
- Cladding panel layouts
- Head / sill / jamb details
- Vertical / horizontal sections
- Interface details
- Coordination views
- Revised drawing packages
Façade Drawing QA / QC
Drawing Quality Before Project Submission
Façade drawing quality depends on consistent source information, dimensions, system references, drawing coordination and controlled revisions.
QA should distinguish drafting completeness from engineering approval and formal system-performance responsibility.
Source Alignment
Review drawings
against supplied
project information.
Grid & Level References
Check required
building reference
information.
Elevation Consistency
Review layouts
across related
façade drawings.
Detail References
Check drawing
callouts,
sections
and detail references.
Interface Review
Keep structural
and architectural
interface conditions visible.
Revision Status
Confirm approved
comments
and current information
are reflected.
Revision Management
Keep Façade Drawings Aligned with Project Changes
STEP 01
Receive Comments
Review marked-up
drawings,
redlines
and approved comments.
STEP 02
Identify Impact
Determine which
elevations,
sections
and details
require updates.
STEP 03
Update Drawings
Incorporate approved
project changes
into relevant documentation.
STEP 04
Cross-Check
Review related
plans,
elevations,
sections
and details.
STEP 05
Review Interfaces
Check whether
revisions affect
adjacent building systems.
STEP 06
Update Revision Data
Maintain drawing
identification
and revision information.
STEP 07
QA Review
Check updated
drawing consistency
before reissue.
STEP 08
Reissue
Prepare the
revised package
for the next
project review stage.
Project Applications
Façade Documentation Across Building Types
Commercial Buildings
Curtain wall,
storefront
and glazed envelope
drawing support.
High-Rise Buildings
Repetitive façade zones,
floor-to-floor conditions
and elevation coordination.
Hospitality
Glazing,
entrances,
architectural panels
and exterior-envelope interfaces.
Healthcare
Façade and
opening documentation
coordinated with
complex building requirements.
Education
Curtain wall,
glazing
and architectural cladding
for institutional projects.
Renovation & Replacement
Support façade
renovation projects
using supplied
existing-condition information.
Scope Responsibility
Façade Shop Drawing Support Does Not Automatically Include Façade Engineering
MEP Global Engineering can develop façade shop drawings and digital documentation from supplied design, system, structural and manufacturer information.
Structural calculations, glass design, anchor design, connection engineering, wind-load analysis, thermal or water-performance calculations, system testing, certifications, professional approval and stamping remain with the responsible project professionals unless specifically included through an appropriate engineering scope.
Design Basis
Approved architectural
and system information
forms the drawing basis.
Shop Drawing Production
Develop layouts,
details,
elevations
and coordinated drawing packages.
Engineering Responsibility
Structural and
performance engineering
remains with
the appropriate professionals.
Formal Approval
Final approval,
certification
and stamping
remain project-specific.
Related Services
Connect Façade Documentation to BIM & Project Coordination
Frequently Asked Questions
Façade Shop Drawing FAQs
What are façade shop drawings?
Façade shop drawings are detailed project documents developed from supplied design and system information. They can include elevations, layouts, sections, component organization and project-defined interface details.
Can you prepare curtain wall shop drawings?
Yes. Curtain wall shop drawing support can include elevations, mullion and transom layouts, sections, head, sill, jamb and related interface documentation based on supplied system information.
Can storefront and glazing drawings be included?
Yes. Storefront, glazing, entrance and opening-related façade documentation can be included where defined by project scope.
Can cladding panel layouts be prepared?
Yes. Panel layouts, joint organization, identifiers and project-defined cladding documentation can be developed from suitable design information.
Can façade drawings be coordinated with structural and architectural models?
Yes. Façade information can be coordinated with architectural and structural BIM to review slab edges, openings, framing and adjacent conditions.
Do façade shop drawings include structural calculations or professional stamping?
Not automatically. Structural calculations, glass engineering, anchor design, connection engineering, façade-performance engineering, testing, certification and professional stamping remain separate responsibilities unless specifically included through an appropriate engineering scope.
Façade Documentation & Coordination
Need Curtain Wall, Glazing or Cladding Shop Drawing Support?
Share your architectural drawings, façade system information, structural references, project specifications and required shop drawing outputs.