Light Gauge Wall Framing
Develop wall framing layouts based on supplied design and architectural information.
LIGHT GAUGE STEEL • COLD-FORMED STEEL • SHOP DRAWINGS
Light Gauge Steel & Cold-Formed Steel Detailing Services
Develop coordinated light gauge and cold-formed steel shop drawing packages from supplied engineering and architectural information — covering wall framing, studs, tracks, headers, jambs, joists, openings, panel drawings, framing elevations and material information.
Review
Engineering Inputs
Detail
Framing Systems
Coordinate
Building Interfaces
Deliver
Shop Drawings
Cold-Formed Steel Documentation
Turn Framing Design into Clear, Coordinated Shop Drawings
Cold-formed steel framing involves more than repeating studs across a wall.
Openings, headers, jambs, track conditions, joists, deflection interfaces, structural supports and architectural requirements all influence the final framing layout.
Detailed shop drawings organize this information into practical plans, elevations, panels and schedules for project review and downstream execution.
Engineering Information → Framing Layout → Coordination → Shop Drawings
Structured LGS / CFS documentation
for coordinated project delivery.
LGS / CFS Detailing Capabilities
Detailed Framing Documentation Across Cold-Formed Steel Systems
Detailing scope can be developed from supplied structural design, approved framing criteria, architectural information and project-specific requirements.
Stud Layouts
Document project-defined stud locations, spacing, types and framing zones.
Track Layouts
Detail project-defined top, bottom and related track conditions.
Door & Window Openings
Coordinate framing around project-defined openings, heads and jamb conditions.
Header Detailing
Document supplied header configurations and framing above openings.
Jamb Framing
Detail supplied jamb conditions at doors, windows and other openings.
Floor & Roof Joist Layouts
Prepare project-defined joist layouts and related framing information.
Panel Shop Drawings
Develop panelized framing drawings where prefabrication is included in scope.
Material Information
Prepare project-defined member, panel or framing material information.
Framing Components
Typical Cold-Formed Steel Elements
COMPONENT 01
Studs
Vertical framing
members based on
supplied structural
and wall information.
COMPONENT 02
Tracks
Top,
bottom
and project-defined
track conditions.
COMPONENT 03
Headers
Framing above
doors,
windows
and other openings.
COMPONENT 04
Jambs
Opening-side framing
based on supplied
project requirements.
COMPONENT 05
Sills
Project-defined
framing conditions
below window
or wall openings.
COMPONENT 06
Joists
Floor
or roof framing
members where
included in design.
COMPONENT 07
Bridging
Supplied bridging
or bracing
information
where required.
COMPONENT 08
Blocking
Project-defined
blocking locations
and framing support.
COMPONENT 09
Built-Up Members
Multi-member
configurations
based on
supplied engineering information.
COMPONENT 10
Deflection Conditions
Document project-defined
head-of-wall
or movement interfaces.
COMPONENT 11
Framed Openings
Coordinate openings
for doors,
windows
and project services.
COMPONENT 12
Panel Assemblies
Project-defined
panelized framing
assemblies
where applicable.
Detailing Responsibility
A Complete Framing Drawing Does Not Automatically Mean the Framing Was Engineered
Shop drawings can communicate framing geometry, member locations, openings and project-defined connections.
Structural design, member selection, loading, connection engineering and professional approval remain separate responsibilities unless explicitly included in the project scope.
Engineering Basis
Detailing follows
supplied structural
and project information.
Framing Documentation
Organize members,
openings,
panels
and drawing information.
Connection Information
Detail supplied
or approved
connection requirements
where included.
Professional Design
Structural analysis
and engineering approval
remain with
the responsible professional.
LGS Detailing Workflow
From Engineering Inputs to Coordinated Framing Drawings
01
Review
Review structural, architectural and approved framing information.
02
Setup
Establish levels, grids, wall zones and drawing structure.
03
Detail
Develop framing, openings, joists and panel information.
04
Coordinate
Review framing against architecture, structure and adjacent disciplines.
05
Revise
Incorporate approved redlines, comments and project changes.
06
Deliver
Prepare coordinated shop drawings and project-defined material information.
Drawing Deliverables
Typical Light Gauge Steel Shop Drawing Outputs
Wall Framing Plans
Show framing zones, wall locations, project-defined member information and related references.
Framing Elevations
Document studs, headers, jambs, openings and framing relationships.
Panel Drawings
Develop panelized wall framing information where the project uses prefabricated assemblies.
Joist Layouts
Document supplied floor or roof joist arrangements and framing zones.
Opening Details
Show project-defined framing conditions around doors, windows and service openings.
Framing Sections
Develop selected vertical and horizontal framing section views.
Interface Details
Document framing transitions at slabs, structural supports and adjacent construction.
Material Information
Prepare project-defined member, panel or material schedules where required.
Framing Applications
LGS / CFS Detailing Across Framing Conditions
Exterior Wall Framing
Project-defined
cold-formed framing
at exterior
building-envelope zones.
Interior Framing
Light gauge
partition framing
where included
within structural scope.
Infill Framing
CFS framing
between primary
structural components
as defined by design.
Floor Joist Systems
Project-defined
cold-formed steel
floor framing layouts.
Roof Framing
Cold-formed roof
framing information
based on supplied design.
Panelized Framing
Shop drawing support
for prefabricated
LGS wall
or framing panels.
Framing Interfaces
Coordinate Light Gauge Framing with the Building Around It
INTERFACE 01
Concrete Slabs
Review framing
start and termination
relative to
supplied slab information.
INTERFACE 02
Structural Steel
Coordinate CFS framing
with primary
steel support conditions.
INTERFACE 03
Façade Systems
Review framing
interfaces with
curtain wall,
glazing
or cladding zones.
INTERFACE 04
Door Openings
Coordinate header,
jamb
and framing
around project-defined doors.
INTERFACE 05
Window Openings
Coordinate sill,
header,
jamb
and adjacent framing.
INTERFACE 06
MEP Penetrations
Review project-defined
service openings
and framing interfaces.
INTERFACE 07
Roof Conditions
Coordinate framing
with supplied
roof and
parapet information.
INTERFACE 08
Deflection Zones
Document supplied
movement
or deflection
requirements where applicable.
BIM & Framing Coordination
Connect Cold-Formed Steel to the Federated Model
LGS + Architecture
Coordinate wall locations,
openings,
floor heights
and architectural geometry.
LGS + Structure
Review framing
relative to
primary structural
support conditions.
LGS + Façade
Coordinate exterior framing
with glazing,
cladding
and envelope interfaces.
LGS + MEPF
Review project-defined
service openings
and framing conflicts.
LGS + Interiors
Coordinate partition
and wall framing
with project-defined
interior requirements.
LGS + Openings
Coordinate doors,
windows
and project-specific
framed openings.
Inputs & Deliverables
Engineering Information In. Detailed Framing Drawings Out.
Typical Inputs
- Structural engineering drawings
- Cold-formed steel design information
- Architectural drawings
- Architectural BIM models
- Structural BIM models
- Approved member information
- Opening schedules
- Project specifications
- Approved connection information
- Review comments / redlines
Typical Deliverables
- LGS / CFS shop drawings
- Wall framing plans
- Framing elevations
- Panel drawings
- Joist layouts
- Opening details
- Framing sections
- Interface details
- Material information
- Revision packages
LGS Detailing QA / QC
Check the Framing Before Drawing Issue
Detailing quality depends on current structural and architectural information, consistent framing references and controlled revisions.
QA should review wall locations, openings, member information, framing elevations, interfaces and project-defined schedule information.
Grid & Level Check
Confirm framing
references align
with project information.
Wall Location Check
Review framing
against architectural
wall positions.
Opening Check
Confirm project-defined
doors,
windows
and service openings.
Member Information
Check supplied
member types,
sizes
and drawing references.
Interface Check
Review structural,
façade
and architectural interfaces.
Revision Check
Confirm approved
project changes
are incorporated.
Material & Framing Information
Organize Project-Defined Framing Data
DATA 01
Member Reference
Project-defined
framing member
identification.
DATA 02
Member Type
Supplied stud,
track,
joist
or other member type.
DATA 03
Member Size
Document approved
member dimensions
from engineering information.
DATA 04
Gauge / Thickness
Record supplied
material thickness
where required.
DATA 05
Spacing
Document supplied
framing spacing
requirements.
DATA 06
Length
Project-defined
member length
or cut information
where included.
DATA 07
Quantity
Prepare drawing-derived
quantities
where project scope requires.
DATA 08
Location
Connect framing
information
to project-defined
wall,
zone
or panel references.
Project Applications
Light Gauge Steel Detailing Across Building Types
Commercial Buildings
Exterior,
interior
and infill
cold-formed steel framing.
Residential & Multifamily
Wall,
floor
and roof framing
shop drawing support.
Hospitality
Repetitive wall framing,
openings
and panelized
project conditions.
Healthcare
Coordinated framing
around complex
architectural
and MEPF requirements.
Education
Light gauge framing
for institutional
and campus projects.
Modular / Panelized Projects
Detailed framing
and panel documentation
for defined
prefabrication workflows.
Scope Responsibility
Light Gauge Steel Detailing Does Not Automatically Include Cold-Formed Steel Engineering
MEP Global Engineering can prepare light gauge steel shop drawings and coordinated framing documentation from supplied structural and architectural information.
Load calculations, member sizing, lateral design, connection engineering, fastening design, deflection calculations, structural analysis, code responsibility, professional approval and stamping remain with the responsible structural or cold-formed steel engineer unless specifically included through an appropriate professional scope.
Engineering Basis
Approved structural
information forms
the detailing basis.
Shop Drawing Production
Develop framing plans,
elevations,
panels
and related details.
Connection Information
Document supplied
connection requirements
where included.
Engineering Approval
Structural design
and professional approval
remain project-specific responsibilities.
Related Services
Connect LGS Detailing to Structural & Architectural Delivery
Frequently Asked Questions
Light Gauge Steel Detailing FAQs
What is light gauge steel detailing?
Light gauge steel detailing develops project-specific shop drawings for cold-formed framing systems such as studs, tracks, headers, jambs, joists, openings and wall panels based on supplied engineering information.
Can you prepare wall framing plans and elevations?
Yes. Depending on scope, deliverables can include wall framing plans, framing elevations, panel drawings, opening details and selected framing sections.
Can floor and roof joist layouts be included?
Yes. Where suitable engineering information is supplied, project-defined floor or roof joist layouts can be documented.
Can framing around doors and windows be detailed?
Yes. Headers, jambs, sills and adjacent framing can be detailed based on supplied engineering and architectural information.
Can light gauge steel framing be coordinated with BIM models?
Yes. Framing information can be coordinated with architectural, structural, façade and MEPF models where suitable project information is available.
Does LGS detailing include structural calculations or member sizing?
Not automatically. Member sizing, load calculations, connection engineering, lateral design, structural analysis, code responsibility and professional approval remain with the responsible structural or cold-formed steel engineer unless specifically included through an appropriate engineering scope.
Cold-Formed Steel Documentation
Need Light Gauge Steel or CFS Shop Drawing Support?
Share your structural drawings, architectural plans, cold-formed steel design information, project specifications and required framing deliverables.