01
Plan
Define BIM requirements, execution and project standards.
BIM • MEPF • VDC • DIGITAL ENGINEERING
Integrated BIM, Engineering & Digital Project Delivery Services
Support the complete AEC information lifecycle — from BIM strategy, modeling, multidisciplinary coordination and technical documentation through detailing, reality capture, as-built information, asset data, digital handover and facility-ready digital information.
Plan
BIM Strategy
Produce
Models & Drawings
Coordinate
Multidiscipline Delivery
Handover
Digital Facility Information
One Connected Service Portfolio
BIM Should Support the Project Lifecycle — Not Exist as an Isolated Task
Different project stages require different digital services. Early delivery may require BIM strategy, execution planning and preconstruction support.
Construction delivery may require modeling, VDC coordination, clash detection, detailing, shop drawings and controlled documentation.
Project closeout can then extend into as-built BIM, asset information, COBie, digital handover and facility-operation workflows.
Strategy → Production → Coordination → Documentation → Handover → Operations
A connected
digital-delivery service structure
across the AEC lifecycle.
Complete Service Portfolio
Explore Services by Project Requirement
Navigate the portfolio by delivery stage, discipline or lifecycle requirement.
BIM Strategy
BIM Production
MEPF & VDC
Structural & Detailing
Reality Capture
Documentation & Visualization
Facility Lifecycle
BIM Outsourcing
Category 01
BIM Strategy, Governance & Preconstruction
Establish BIM requirements, delivery standards, responsibilities, model governance, coordination processes and project controls before production scales.
BIM Strategy
BIM Consulting
BIM strategy, information requirements, governance and digital-delivery planning.
View Service Delivery PlanningBIM Execution Plan Services
Define workflows, responsibilities, model structure, information exchange and QA requirements.
View Service BIM AdoptionBIM Implementation
Establish standards, templates, workflows, pilot delivery and scalable BIM practices.
View Service QA / QCBIM Model Audit
Review model structure, standards, coordinates, information quality and delivery readiness.
View Service PreconstructionBIM Preconstruction
Federate project information, identify interfaces and support early coordination readiness.
View Service Construction ReadinessConstructability Review
Review installation access, clearances, interfaces, congestion and maintenance zones.
View Service Sequence4D BIM & Sequencing
Connect suitable project model information with defined construction sequence data.
View Service Quantity Information5D BIM
Structure model-based quantity information for project-defined cost workflows.
View Service SustainabilityEnergy & Sustainability Support
BIM-supported building information for defined energy and sustainability workflows.
View Service
Category 02
BIM Modeling & Digital Production
Develop structured architectural, structural and multidisciplinary models from approved project information, drawings and defined BIM requirements.
Core BIM
BIM & Digital Engineering
Integrated digital modeling and project-information production support.
View Service ArchitectureArchitectural BIM
Revit modeling, design-development support, documentation and architectural coordination.
View Service StructureStructural BIM
Concrete, steel, foundation, framing and structural-interface modeling.
View Service ConversionCAD to BIM
Convert suitable legacy CAD and drawing information into structured BIM models.
View Service BIM ContentRevit Family Creation
Develop reusable project-defined Revit families and controlled content.
View Service Digital LibrariesBIM Content & Libraries
Standardized model content, information fields and reusable BIM libraries.
View Service ProductivityBIM Automation
Support repeatable BIM production, checking and information workflows.
View Service
Category 03
MEPF, Coordination & VDC
Coordinate mechanical, electrical, plumbing, fire-protection and multidisciplinary building systems through controlled digital workflows.
MEPF
MEPF Engineering Support
BIM and technical production support based on supplied engineering design information.
View Service CoordinationVDC & BIM Coordination
Federated-model coordination, interface review and issue-resolution workflows.
View Service Clash ReviewMEP Clash Detection
Identify modelled physical conflicts and support controlled issue resolution.
View Service DocumentationMEP Shop Drawings
Coordinated discipline drawings based on supplied project design information.
View Service
Category 04
Structural, Steel & Specialist Detailing
Translate approved project engineering and system information into controlled fabrication, shop drawing and detailing packages.
Structural Steel
Steel Detailing
Structural steel shop drawing and model production from supplied engineering.
View Service Connection InformationSteel Connection Detailing
Detail approved connection information within structural steel production workflows.
View Service Field AssemblySteel Erection Drawings
Develop erection plans, member identification and assembly-reference documentation.
View Service Miscellaneous SteelMiscellaneous Metals
Detailing support for stairs, rails, ladders and project-defined miscellaneous metal elements.
View Service Cold-Formed SteelLight Gauge Steel Detailing
Stud, track, joist, opening and framing-detail support from supplied engineering information.
View Service ReinforcementRebar Detailing
Reinforcement detailing, schedules and project-defined bar information.
View Service Building EnvelopeFaçade Shop Drawings
Curtain wall, glazing, cladding and façade-interface documentation support.
View Service
Category 05
Reality Capture, Existing Conditions & As-Built
Convert measured, scanned and legacy project information into structured digital records for renovation, retrofit and facility workflows.
Reality Capture
3D Laser Scanning Support
Reality-capture information support for existing-building digital workflows.
View Service Point Cloud ModelingScan to BIM
Develop BIM from suitable point-cloud and existing-condition information.
View Service CAD ConversionPoint Cloud to CAD
Convert suitable point-cloud information into controlled 2D CAD documentation.
View Service Existing FacilitiesExisting Conditions BIM
Establish digital existing-state models for renovation and facility planning.
View Service Record InformationAs-Built BIM & Drawings
Develop controlled record models from supplied approved closeout information.
View Service
Category 06
CAD, Documentation & Visualization
Support drawing production, documentation conversion, spatial communication and presentation-ready project visualization.
2D Documentation
CAD Drafting Services
Controlled 2D drawing production, updates and drafting support.
View Service Project DocumentationConstruction Documentation
Model-based and drawing-based project documentation support.
View Service Spatial Information2D & 3D Floor Plans
Floor plan, spatial-layout and three-dimensional presentation support.
View Service Visualization3D Rendering & Visualization
Exterior, interior, renovation and BIM-based project visualization.
View Service
Category 07
Facility Information, Asset Data & Digital Twin
Extend digital information beyond construction into project closeout, asset data, structured handover and facility-operation workflows.
Closeout
Facilities & Digital Handover
Organize models, documents and facility information for project transition.
View Service Structured HandoverCOBie & BIM Handover
Prepare project-defined facility, asset, space, system and handover data.
View Service Asset InformationBIM Asset Management
Structure asset IDs, equipment data, locations, systems and related records.
View Service Operational BIMBIM for Facility Operations
Prepare operational model information, equipment-location data and facility records.
View Service Digital LifecycleDigital Twin Services
Build structured BIM and asset-information foundations for wider digital-twin workflows.
View Service
Category 08
BIM Outsourcing & Dedicated Resources
Add controlled BIM production capacity through project-based support, defined work packages, overflow capacity or dedicated production resources.
Outsourcing
BIM Outsourcing Services
Project-based BIM production, coordination, documentation and QA support.
View Service Dedicated ResourcesDedicated BIM Resources
Structured production resources supporting recurring project workloads.
View Service CapacityOverflow BIM Support
Additional production capacity during workload peaks and defined schedule demands.
View Service
Integrated Delivery
More BIM Services Do Not Automatically Mean Better Project Delivery
A large service portfolio only creates value when the work is connected through clear scope, reliable source information, coordination, QA and responsibility boundaries.
Each service should support a defined project need — rather than adding unnecessary modeling or documentation.
Define the Requirement
Start with
project purpose,
required outputs
and information needs.
Use Controlled Inputs
Base production
on identified
drawings,
models
and project information.
Coordinate the Interfaces
Review relevant
multidisciplinary
and construction interfaces.
Validate Before Delivery
Apply appropriate
QA
before formal
issue or handover.
Project Delivery Path
Support from Strategy through Facility Information
02
Model
Develop required digital geometry and project information.
03
Coordinate
Review interfaces, clashes and multidisciplinary project conditions.
04
Document
Produce drawings, shop documentation and required project outputs.
05
Handover
Prepare controlled as-built, asset and facility information.
06
Operate
Extend structured information toward facility and digital-lifecycle workflows.
Engagement Options
Support Structured Around the Project Need
OPTION 01
Defined Project Scope
A clearly defined
BIM,
coordination,
detailing
or documentation package.
OPTION 02
Work-Package Support
Specific disciplines,
floors,
zones
or deliverable packages.
OPTION 03
Recurring Production
Ongoing modeling,
documentation
or project-support workflows.
OPTION 04
Dedicated BIM Resources
Defined resources
supporting recurring
workloads
under agreed processes.
Industry Experience Areas
Digital Engineering Across Complex Building Types
INDUSTRY
Data Centers
High-density
multidisciplinary
BIM and coordination workflows.
INDUSTRY
Healthcare
Complex healthcare
building
and technical-system coordination.
INDUSTRY
Industrial & Manufacturing
Technical
and equipment-intensive
project delivery.
INDUSTRY
Commercial Buildings
BIM,
coordination
and project documentation
for commercial facilities.
INDUSTRY
Residential & Multifamily
Repetitive building systems
and coordinated
residential workflows.
INDUSTRY
Hospitality
Guestroom,
public-space
and building-services
BIM workflows.
INDUSTRY
Education
Academic
and institutional
project information delivery.
INDUSTRY
Life Sciences
Controlled digital
workflows
for complex
technical facilities.
INDUSTRY
Semiconductor & High-Tech
High-density
technical coordination
for advanced facilities.
BIM • MEPF • VDC • DIGITAL DELIVERY
Not Sure Which Service Fits Your Project?
Share your current drawings, models, project stage, delivery requirements and expected outputs. We can structure the work around the actual project need.